Aeroscreen center mounting bracket for use with the Caterham Style S3 Series 3 Aero screen

Bracket measures 100mm wide and 90mm deep. This is sufficient width to accomodate the Caterham poppers on the top of the scuttle panel (these are 75mm apart).

Bracket should be bonded to the aeroscreen and will need to be drilled to line up with your popper holes - the poppers are held in place with a self tapping screw into the steel hoop of the chassis

All of our products are handmade by hand. As a result of this process, minor changes as well as slight, hardly detectable irregularities (distortions / bulges in the fabric, minor scratches, etc.) can occur from part to part.

We understand that you, as an enthusiastic enthusiast, buy our products as you admire the uniqueness of every handmade product we sell. At the same time, however, it is very important to us that this is properly understood, since every single piece is handmade. Details are not as flawless as machine-made and discrepancies in design might also occur.

Please note : These products are made to order so please be aware the lead time will be 20 - 30 working days but well worth the wait