This is a Wilwood rear brake caliper kit for the Ford Sierra Labro (Lobro) bolt on drive shafts for a 13" wheel.

This kit has been designed and tested for Compomotive CXR 13 x 8J and Team Dynamics Pro Race 1.2

The Labro drive shafts use a 68mm bearing and this kit uses our rear disks for the Wilwood rear brakes.

Everything in this kit is required for using 13" wheels with bolt on drive shafts.

Kit Contents

Billet Aluminium Bearing Carrier x2

Aluminium Caliper Carrier For Wilwood Powerlite Caliper x2

Wilwood Powerlite Rear Caliper With Handbrake attachment x2

Solid Rear Disks 247mm x2

Note: If you are using Pro Race 1.2 13" wheels, you will need a 6mm spacer.

Also Note : Rear hubs are required to be turned down in order for this kit to fit, diameter required is 134mm, or order our rear hubs which have already been done for this kit.